High Alumina Cement (previously called bauxite cement) is a kind of grinding hydraulic cementing materials with clinker about 50% alumina content and has calcium aluminate as the main material, which is also called refractory cement, which can be made to low cement high alumina castable to build or repair all kinds of furnace and kilns for thermal insulation or acid erosion resistance with high strength.
sales@refractoryonline.com
Get Free Quote
Description for High Alumina Cement
High Alumina Cement uses bauxite and lime as the raw materials, which is a kind of hydraulic binders with aluminate as the main mineral composition that through calcining and grinding fine according to certain proportion. Its professional title is Aluminate Cement.
Rongsheng as one of professional high alumina cement suppliers manufactures all kind of refractory cement for various furnaces and kilns building to resist sulfate attack.
Properties of High Alumina Cement
Early strength characteristics: Its early strength increase rate is far more than rapid hardening portland cement, high alumina cement is suitable for emergency repair engineering. Take restrictions on the use in structure engineering to prevent from the long-term strength reducing.
Larger heat of hydration: Early cement hardening heat release is larger. Compared with Portland cement at same grade, just a day can release 70 ~ 80% of the total heat of hydration. Due to the several kinds of heat release, high alumina refractory cement is suitable for low temperature curing of concrete engineering.
Strong resistance to sulfate attack: hydration process generates aluminium hydroxide gel to form a protective film instead of non-precipitating free alternating current calcium hydroxide. Latterly in the crystal transformation in the process of the erosion resistance will decrease.
Good high temperature resistance: High alumina refractory cement can be used as heat resistant concrete cementitious materials to be configured to heat resistant concrete.
Application of High Alumina Cement
High alumina cement is mainly used to configure refractory castable such as high alumina low cement castable which can build or repair furnace or kiln for heat insulation or high temperature erosion.
sales@refractoryonline.com
Get Free Quote
Quality Index of High Alumina Cement
Grade
High alumina cement grade is tested compressive strength of 3 days according to the strength testing method of standard provisions and is divided into four grades of 425, 525, 625 and 725. (According to GB201-2000 requirement, high alumina refractory cement standard is revised as aluminate cement, aluminate cement standard of division is aluminum content, of which the original series of CA50 is canceled, and set up in accordance with the 3 day strength subdivided such as A600 and A700, A900 grade and etc.)
Fineness
Residue on sieve of 0.088 mm square hole sieve should be less than 10%.
Note: uses specific surface area to replace cement fineness. Specific surface area shall not be less than 2400cm/2g according to GB 207-63 “cement specific surface area testing method”. It subjects to sieve analysis method.
Setting time
Initial setting time should not be earlier than 40 minutes and final setting time should not be later than 10 hours.
Intensity
28 days intensity should be detected and its value shall not be less than grade index for 3 days.
Chemical composition
SiO2≤10%, Fe2O3≤3%.
sales@refractoryonline.com
Get Free Quote
Various cheap high alumina cement for sale in Rongsheng Refractory with high quality for high heat equipment application, such as high alumina refractory cement, low cement high alumina castable, refractory cement and etc.
Leave Your Requirement on RS Refractory Materials and Firebricks! We Will Reply You In 12 Hours!: